What is the function of hdpe jointing machine?

The facing of hdpe jointing machine and traditional HDPE piping has its characteristics, but it also has its limitations. But generally speaking, more and more people will choose different hdpe jointing machines depending on specific conditions under different conditions. This is because the tightness of butt welding joints is more reliable than other jointing method.

Why more and more people choose hdpe jointing machine?

What is the working principle of hdpe jointing machine?

How to deal with poor welding of hdpe jointing machine?

Why more and more people choose hdpe jointing machine?

1. The hdpe jointing machine has an optical calibration workstation, equipped with high-precision cameras, servo motors and other operating hoses, and the design plan is in the effective part;

2. The hdpe jointing machine has laser cutting organization to ensure product quality;

3. Seal the end of hdpe jointing machine. The end of the pipe is heated internally, and the refrigeration equipment is equipped outside.

4. The computer typing workstation of hdpe jointing machine will automatically copy the identifiers on the special parts needed in the process;

5. Common fault alarms of hdpe jointing machine, no-pipe alarms, door open shutdown, load shutdown.

What is the working principle of hdpe jointing machine?

hdpe jointing machine through ultrasonic plastic welding, all hot-melt plastic products can be applied. No solvent, adhesive or other auxiliary products are required. Improve productivity, low cost, improve product quality and production safety. The principle of hdpe jointing machine is provided by Lingke ultrasonic. It converts the mains power (ac220-240v, 50-60Hz) into high-frequency and high-voltage signal through the electric box, and then converts the signal into high-frequency mechanical vibration through the transducer system, which is added to the plastic product, resulting in high-speed friction between the two parts of the plastic product and temperature rise. When the temperature reaches the melting point of the product itself, Make the product interface melt quickly, and the product is cooled and shaped under a certain pressure, so as to achieve perfect fusion.

How to deal with poor welding of hdpe jointing machine?

You should first check whether the basic usage methods are correct (direction, splicing time, pressure, etc.). If all of these are correct, or the previous use is no problem, then look at the following.

First, see if the hdpe jointing machine head is tightened. It must be tightened with a tool. Usually there will be a lot of noise if it is not tightened, this is because of overtones.

Then check whether the length of the welding head is correct if it is not resolved. If it is worn and the length difference is relatively large, then the resonance will disappear, so the energy transfer efficiency will be reduced, and the welding will not be good.

If this is not right, check if the connection to the ultrasonic transducer is correct.

After reading this, have you also had the idea of ordering a hdpe jointing machine? "People-oriented, honesty first" has always been the development concept of WELPING Co., Ltd. Here, you can get the best quality hdpe jointing machine and the most intimate after-sales service.