What is the significance of electrofusion welding machine?

The electrofusion welding machine uses the high temperature arc produced by the instantaneous short circuit between the plus and minus poles to melt the lot and the material to be welded on the electrode and to connect the objects to be contacted. Its structure is very simple, which is a high-performance transformer.Depending on the type of output power supply, the electrofusion welding machine can be divided into two types: AC power supply and DC power supply.

What is the current development of the electrofusion welding machine?

What are the operating steps of the electrofusion welding machine?

What can we do if the electrofusion welding machines?

What is the current development of the electrofusion welding machine?

electrofusion welding machine adjusts product structure, improves product grade, and conforms to market requirements. Inverter multi-function gas shielded welding machine, inverter submerged arc welding machine, with good performance and reliability and durability, has won praise from customers. Inverter welding machines will develop in the direction of digitization, lightness, energy saving, and high reliability.

Digital inverter power supply and high-efficiency gas protection electrofusion welding machine are the development direction for the next 15 years. Welding machines will realize digital technology, and intelligent technology is becoming more and more mature and higher. Inverter CO2 welding achieves true pulse by drop. Closed-loop control of the droplet transition within the full range of specifications, one-pulse one-drop control also adopts closed-loop control.

What are the operating steps of the electrofusion welding machine?

Operation steps of electrofusion welding machine:

1. Prepare electric welding machine, PE pipes and pipe fittings to be welded (remove the oxide layer at the insertion end of PE pipes if necessary).

2. Insert electric melting pipe fittings, and the inserted pipe fittings should be easily inserted.

3. When ready, insert the output electrode of the electrofusion welding machine into the electrode column of the pipe fitting.

4. Start the electrofusion welding machine, scan the bar code or input the voltage and time parameters to be welded before welding.

5. After the end of the welding countdown, the output cable can be removed without affecting the pipe cooling and welding, and the next welding will be started.

What can we do if the electrofusion welding machines?

Current maintenance methods for electrofusion welding machines

1.Resistance.

An electrofusion welding machine shall be used to measure the resistance value of each device in the electric welding machine.Check if there is a short circuit or a circuit breaker.For example, whether the resistance is damaged by changing the value, the capacity is exhausted, the transistor is disabled and damaged, short circuit or idling, etc.This method is the simplest and most commonly used method and is suitable for preliminary error assessments of resistors, capacitors, inductivities, transistors, integrated circuits, etc.

2.Tension.

It shall be measured whether the working voltage of each working point of the electrofusion welding machine is normal when the circuit is switched on.This method requires familiarity with the circuit.But his measurement and evaluation results will be more accurate.

3.Replacement.

It is a method for assessing and finding errors in some components in the electrofusion welding machine that cannot be classified as normal or not, and replacing them with good components.This method is generally used for machines that can roughly determine the error location and is generally used as a follow-up assessment method for the resistance method.

WELPING Co., Ltd. has worked on the production of electrofusion welding machines for over ten years. You can find the best electrofusion welding machine in this company.