How to use hdpe jointing machine?

The hdpe jointing machine, this kind of machine is processed by hot-melt glue to join two pieces of veneer into one veneer. This kind of machine requires high precision. The thickness deviation of the veneer should not be too large, otherwise it will not be good! A lot of attention should be paid to the smoother wood. Thickness, the thickness between pieces, etc.; the splicing length is 3M.

How to choose hdpe jointing machine?

Why should we choose hdpe jointing machine?

How to use hdpe jointing machine?

How to choose hdpe jointing machine?

1. Power

The first is power. Laser is the core of hdpe jointing machine. The greater the power, the higher the price. Because the higher the power, the higher the requirements for the laser rod and cooling system.

2. Configuration

Then there is configuration. The configuration of hdpe jointing machine involves many aspects:

The configuration of hdpe jointing machine is different for different purposes, such as mold welding for welding molds, jewelry welding for welding jewelry, galvanometer welding in automatic welding machines, optical fiber transmission laser welding machines, optical fiber continuous laser welding machines, etc. The equipment is different, the price is naturally different.

In addition, the hdpe jointing machine is generally more expensive than the manual welding machine, because automatic control system, CCD camera monitoring system and other supporting automatic configuration are required.

Why should we choose hdpe jointing machine?

1. The welding efficiency of hdpe jointing machine is 2 to 3 times higher than traditional welding.

2. hdpe jointing machine meets mass and continuous production. Because the manual operation is replaced by machines, you don't have to worry about labor tension.

3. The hdpe jointing machine does not require technical requirements, the general workers can operate, the operation is simple and easy to understand, and the argon welding requires professional skills, and the salary is higher than the general workers.

4. The hdpe jointing machine can reduce the heat input to the minimum required amount, the metallographic change range of the heat-affected zone is small, and the deformation caused by heat conduction is also the lowest.

How to use hdpe jointing machine?

1. Remove the oil stains on the upper and lower electrodes before using hdpe jointing machine.

2. Before starting the hdpe jointing machine, first turn on the steering switch of the control line and the small switch of the welding current, adjust the number of poles, then turn on the water source and air source, and finally turn on the power supply.

3. After the hdpe jointing machine is powered on, check the electrical equipment, operating mechanism, cooling system, air circuit system and body shell for leakage. Electrode contacts shall be kept clean. In case of leakage, it shall be replaced immediately.

4. During hdpe jointing machine operation, the gas circuit and water cooling system shall be unblocked, the gas shall be kept dry, the drainage temperature shall not exceed 40 ℃, and the drainage volume can be adjusted according to the air temperature.

5. When the load is too small so that the arc in the pilot tube cannot occur, the pilot circuit of the control box shall not be closed.

The hdpe jointing machine has been widely used in the large-scale production process. It can be welcomed by large-scale producers for its high production efficiency and low energy consumption.WELPING Co., Ltd. has worked for several years to meet the need of customers from industrial production, and large-scale commercial production.