What is the meaning of plastic pipe butt welder?

The plastic pipe butt welders usually refers to the connection of HDPE, PPR, MPP pipes. For example, HDPE pressure pipes used in common gas pipes and water supply pipes are usually welded by electric heat fusion pipe fittings. Of course, there are also welding using heat fusion butt welding machines. When the pipe surface is damaged, the plastic extrusion welding gun is usually used as a repair tool, but it is limited to small repairs. After all, such pipes are usually pressure-bearing pipes and need to be safe and reliable.

What are the first step to use plastic pipe butt welder?

What are the following step of using plastic pipe butt welder?

What are the precautions for using plastic pipe butt welder?

What are the first step to use plastic pipe butt welder?

Plastic pipe butt welder: Make holes in the plastic storage tank according to the size of the pe flange. If the hole opener is not large enough, first put the pe flange on the position where the plastic storage tank needs to be opened, and use a marker Draw the outer diameter of the pe flange on the plastic storage tank, then use the rotor to turn a hole in the drawn circle, and finally use a jig saw to make a hole along the line drawn on the plastic storage tank.

pe flange selection: select the appropriate pe flange according to the size of the required pipe, after opening the hole in the plastic storage tank, insert the pe flange to see if the pe flange extends in the plastic storage tank. If it is too long, cut it off appropriately to facilitate subsequent operations.

What are the following step of using plastic pipe butt welder?

The plastic pipe butt welder welding: When the flange hole on the plastic storage tank is opened and the pe flange is also sawed, check the pe flange on the plastic storage tank, first light the welding torch, and use the prepared pe welding rod Cut a section, use a welding torch to bake the pe welding rod until it melts, and slowly move it along the joint between the outer wall of the plastic storage tank and the pe flange until the end of the 2 laps. Then go to the plastic storage tank, and weld the connection between the outer wall of the plastic storage tank and the pe flange using the previous method.

Water test: plastic pipe butt welder welding is completed, wait until the pe flange is connected to the plastic storage tank

After cooling down, put water in the plastic storage tank to test whether the plastic storage tank is leaking. If there is no leakage, then you have successfully welded the pe flange joint of the plastic storage tank.

What are the precautions for using plastic pipe butt welder?

1. If there is dust in the plastic storage tank, please clean it first. The hole opened by the plastic pipe butt welder needs to match the flange connection.

2. If the pe flange is dusty, please clean it first, and the flange must be level with the plastic storage tank when welding.

3. When using the plastic pipe butt welder, the fire should not be turned on to the maximum, slow work will produce fine work, and the textile will scorch the plastic storage tank.

4. The plastic pipe butt welder welding pe flange must be welded on the inside and outside of the plastic tank, not only one side

WELPING Industry Co., Ltd., which has been established for over ten years, focuses on the production of plastic pipe butt welders. Here, you can find the plastic pipe butt welders you need.