Views: 0 Author: Site Editor Publish Time: 2022-01-19 Origin: Site
The butt welding machine is a kind of important working machine. If you want to know how it is used properly, please read the following section.
What is the difference between a butt welding machine and a point welding machine?
What precautions should be taken after using the butt welding machine?
What precautions should be taken when using the butt welding machine?
The welding has a wide range of applications. All metal materials that can be forged can be welded by flame-retardant welding. For example, low-carbon steel, low-carbon steel, alloy steel, stainless steel, and other non-ferrous metals and alloys can be welded by welding the exhaust pipe. If you are interested in welding machines, you can look at yourself.
The butt welding machine is common when welding different plates, pipes, profiles, solid parts, cutting tools, etc. used. It is widely used and is an economical and efficient welding process.
The point welder presses the workpiece to be welded between two electrodes and applies an electric current that uses the resistance heating generated by the current flow through the contact surface of the workpiece and the adjacent surface, to heat it in a molten or plastic state to form a mental bond.
The inter-frequency point welding device uses the principle of double-sided double-point overflow welding. During the work, the two electrodes put the workpiece under pressure, so that the two metal layers under the pressure of the two electrodes form a certain transition resistance and the butt welding machine from one electrode to another flows at the two contact points, and the butt welding machine flows from the other electrode along the two workpieces to this electrode to form a loop without damaging the inner structure of the welded workpiece.
1. After the welding process has been completed, the power supply should be interrupted immediately, the switch of the butt welding machine switched off and the power supply and the wire of the welding rod should be adjusted to avoid a short circuit when closing.
2. When removing the weld between the columns of the welder, wear glasses and make sure that the head avoids the direction of injection of the beating weld in order not to burn the eyes and the weld is not present against the people.
3. After outdoor work, cover the butt welding machine to avoid the rain.
4. If welding is not carried out (moving, repairing, adjusting, stopping work), the power supply of the butt welding machine should be interrupted to avoid accidents.
1. A suitable butt welding machine shall be selected according to the technical conditions of the workpiece.
2. Metal cutting with butt welding machine is not allowed.
3. During load welding, the temperature increase of the butt welding machine shall not exceed the specified requirements, otherwise, it shall be stopped for cooling before welding.
4. The working position of the butt welding machine must be dry and well ventilated. The electrical welding device shall be switched off when moving and the plunger welding device shall not be moved by pulling on the cable. In the event of a sudden power failure during welding, the power supply must be interrupted.
5. The current must not be adjusted during welding. The handle shall be used to adjust the current of the butt welding machine when the welding is stopped. It must not be too fast or too hard not to damage the regulator.
This is the information about the butt welding machine. If you would like to learn more about the Stumpfwelder, please connect WELPING.
