Views: 0 Author: Ruby Publish Time: 2026-03-18 Origin: Site
This guide outlines the standard procedure for adjusting pressure using the A PRO hydraulic unit.
Before starting, make sure that: The hydraulic hoses are properly connected and securely fastened
Step 1: Tighten the pressure relief valve
Secure the valve to allow pressure to build up.
Step 2: Push the lever and monitor pressure
Move the control lever forward and observe the pressure gauge.
Step 3: Adjust pressure using the regulator
Rotate the pressure regulator to adjust the pressure: Clockwise rotation increases pressure
Step 4: Stop at the target pressure
Once the desired pressure is reached, stop adjusting.
